Go Back   The Mustang Collective Forums > Mustang Tech > Fox Body 5.0 Tech

Reply
 
Thread Tools Display Modes
1983-1993 Foxbody Mustang Dynacorn Front Floor Cross Brace Install Video
Old
  (#1)
Steve@CJPP
13-Second Member
Steve@CJPP is a total phucktard
 
Steve@CJPP's Avatar
 
Offline
Posts: 285
Thanks: 4
Thanked 6 Times in 5 Posts
Join Date: Dec 2012
Location: Harrisburg, PA
Age: 43
1983-1993 Foxbody Mustang Dynacorn Front Floor Cross Brace Install Video - 01-28-2015


3648XC Mustang Dynacorn Front Floor Cross Brace and Seat Platform 1983-1993 | CJ Pony Parts

In this video we are showing you how to install Dynacorn's front floor cross brace and seat platform fitting all 1983-1993 Mustangs, using our 1991 Mustang Notchback. The front floor cross brace goes across the front floor pan from rocker to rocker and over the transmission tunnel.The bucket seats bolt to this part and this piece is often damaged resulting in a major safety hazard.

To replace the cross brace requires welding, so this would not be for the amateur installer. This installation will be time consuming since you have to remove most of your Mustang's interior, but do take your time and make sure everything is done correctly.

Replacing the cross brace is the best option if your factory seat platform is damaged.

For more Dynacorn parts available at CJ Pony Parts check out:
Dynacorn | CJ Pony Parts

For more Mustang floor pans available at CJ Pony Parts check out:
Mustang Floor Pans | CJ Pony Parts


Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog
   
Reply With Quote
The Following User Says Thank You to Steve@CJPP For This Useful Post:
rampant racing (01-28-2015)
Old
  (#2)
rampant racing
FULL OF NOT SO HOT AIR
rampant racing is a glorious beacon of light, or more like a strobe light when you got a migrane.rampant racing is a glorious beacon of light, or more like a strobe light when you got a migrane.rampant racing is a glorious beacon of light, or more like a strobe light when you got a migrane.rampant racing is a glorious beacon of light, or more like a strobe light when you got a migrane.
 
rampant racing's Avatar
 
Offline
Posts: 5,605
Real Name: gary
Thanks: 342
Thanked 264 Times in 228 Posts
Join Date: Aug 2008
Location: sarnia ont. canada
Age: 52
01-28-2015

I could see going to all that work if the brace was badly rotten or damaged beyond repair but much easier to just fix the tears with metal and nuts or studs. repairing allows you the opportunity to make the area a lot stronger than stock with more support in the stud area where the seat bolts down so it doesn't happen again.very nice looking part though.ps being a metal fabricator I look at all things this way lol. no disrespect intended. nice job.


2008 pony, candy red,8.8 with 4.10's/tloc,,sctx3 tuner,MT28X11.5X15 STREET ET SLICKS
custom 2" stainless headers & duals with gt takeoff muffs,lakewood upper & umi lower control arms and panhard bar,shaftmasters aluminum driveshaft, vortech v3 blower with air to air intercooler running 16psi, COOLINGMIST METH INJECTION KIT. ported n polished heads with custom manley stainless steel valves. manley rods and pistons. new motor combo is not yet dyno tuned. new best time is 12.46 at 110.66mph but the limiter was set for 110 mph lol.
   
Reply With Quote
Reply

Tags
cj pony parts, cross brace, foxbody, install, video


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Skin developed by: vBStyles.com
Shoutbox provided by vBShout v6.2.1 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.